These are screwed on to the end of the cable to reduce friction during cable blowing. Constructed of corrosion resistant brass and made for repeated use.
Insertion tool included. Sold in packs of 10
| Cable Guide Heads | ||
| Size O.D. | Part Number | |
|
|
||
| 2.0mm | 74113 | |
| 2.5mm | 74094 | |
| 4mm | 74095 | |
| 5mm | 74096 | |
| 6mm | 74097 | |
| 6.5mm | 74098 | |
| 7mm | 74099 | |
| 8mm | 74100 | |
| 8.5mm | 74114 | |
| 9mm | 74115 | |
| 10mm | 74116 | |
| 11mm | 74117 | |
| 12mm | 74120 | |
|
Item |
Type |
Note |
|
1 |
12-72core TFJ Splice closure |
Two or four water block connector included (Size will be 10,12 and 14) |
|
2 |
96-144core TFJ Splice closure |
Two or four water block connector incluede (Size will be 10,12 and 14) |
How to use
Process:
1.cut the tube flat and insert the tube into the water block connector
2.put the cable through the tube, some cable left for splicing, then screw the white nut up, be sure cable can not move
3.then tighen the blue ribbon to touch the cable, screw it up 1/4 ring, too much strength will hurt the cable
4.finally do fiber splicing work
Pipe lengthen connector
Operate easily
Protection for the naked micro tube
Pipe repairing connector
Operate easily
Transparent design, be easy to use
Tube Y splitter
Operate easily
Split quicky; suitable for 40 and 50mm
Bundle Six route splitter
Operate easily
Water proof and be buried directly
More branches and be convenient to design optical route
Microduct straight connector
DB cover straight connector
While effectively prevent accidental removal of microducts, strengthen the protection of connectors
Can also be used to directly buried application
Size 5,7,8,10,12,14,16,18mm available
The products use the plastic, Polypropylene, pp
Locking clip
Effectively prevent accidental removal of microducts
Size: 7,8,10,12,14mm available
Microduct end stop
Used to seal a open microduct
Easy installation, whithou any special tools
Transparent plastic body, easy to observe the situation
High temperature resistance -40-65℃
Standard EN50411-2-8
End cap
Used to seal a open microduct
Easy insatallation
Dirt and water tight up
Water block microduct connector
Easy installation, without any special tools
Transparent palstic body, easy to observe the situation
High temperature resistance -40-65℃
Avoid fluid (gas) entering the microducts and damage the equipments
Water block microduct connector (head locker)
Easy installation, without any special tools
Transparent palstic body, easy to observe the situation
High temperature resistance -40-65℃
Avoid fluid (gas) entering the microducts and damage the equipments
End stop water block microduct connector（passive）
Easy installation, without any special tools
Transparent plastic, easy to oberve the situation
High temperature resistance -40-65℃
Avoid fluid (gas) entering the microducts and damage the equipments
Divisible water block connector (positive)
Easy installation, without any special tools
Gas and watertight up to 0.5bar
Suitable for retrofitting
Other versions available upon request
Divisible water block connector
Easy installation, without any special tools
Gas and watertight up to 0.25bar
Suitable for retrofitting
Other versions available upon request
Direct bury straight connector
Designed to connect thick-walled micducts in a direct buried environment
Permanent connection that can not be unlocked after installation
Easy to use, robust and high mechanical resistance
High temperature resistance
High pressure resistance
Standard EN50411-2-8
Direct bury end stop connector
DB end connector is used to seal a open thick -walled microduct and prevent dirt or water ingress.
They can be used for direct buried application.
