Language:
Product产品中心
Home 〉 Product 〉 Micro cable blowing system
Accessories for tube installation
2017/02/12
Accessories for tube and bundle installation mainly when you blowing the mini cable into tube
Micro cable guide heads


These are screwed on to the end of the cable to reduce friction during cable blowing. Constructed of corrosion resistant brass and made for repeated use.
Insertion tool included. Sold in packs of 10


Cable Guide Heads
Size O.D. Part Number

2.0mm 74113
2.5mm 74094
4mm 74095
5mm 74096
6mm 74097
6.5mm 74098
7mm 74099
8mm 74100
8.5mm 74114
9mm 74115
10mm 74116
11mm 74117
12mm 74120



Micro cable splice closure


Item
Type
Note
1
12-72core TFJ Splice closure
Two or four water block connector included (Size will be 10,12 and 14)
2
96-144core TFJ Splice closure
Two or four water block connector incluede (Size will be 10,12 and 14)

How to use
Process:
1.cut the tube flat and insert the tube into the water block connector
2.put the cable through the tube, some cable left for splicing, then screw the white nut up, be sure cable can not move
3.then tighen the blue ribbon to touch the cable, screw it up 1/4 ring, too much strength will hurt the cable
4.finally do fiber splicing work


Stainless steel container
Store for spare micro cable or tube
Material:302 steel
L*W*H: 504*504*120mm



Pipe lengthen connector

Operate easily
Protection for the naked micro tube


Pipe repairing connector

Operate easily
Transparent design, be easy to use


Tube Y splitter

Operate easily
Split  quicky; suitable for 40 and 50mm


Bundle Six route splitter

Operate easily
Water proof and be buried directly
More branches and be convenient to design optical route


Microduct straight connector

Connect two microducts which are the same outer diameter
Easy installation, without any special tools
Transparent plastic body, easy to observe the situation
High temperature resistance -40-65℃
High pressure resistance >25bar
Standard EN50411-2-8


DB cover straight connector

While effectively prevent accidental removal of microducts, strengthen the protection of connectors
Can also be used to directly buried application
Size 5,7,8,10,12,14,16,18mm available
The products use the plastic, Polypropylene, pp


Locking clip

Effectively prevent accidental removal of microducts
Size: 7,8,10,12,14mm available


Microduct end stop

Used to seal a open microduct
Easy installation, whithou any special tools
Transparent plastic body, easy to observe the situation
High temperature resistance -40-65℃
Standard EN50411-2-8


End cap

Used to seal a open microduct
Easy insatallation
Dirt and water tight up


Water block microduct connector

Easy installation, without any special tools
Transparent palstic body, easy to observe the situation
High temperature resistance -40-65℃
Avoid fluid (gas) entering the microducts and damage the equipments


Water block  microduct connector (head locker)

Easy installation, without any special tools
Transparent palstic body, easy to observe the situation
High temperature resistance -40-65℃
Avoid fluid (gas) entering the microducts and damage the equipments


End stop water block microduct connector(passive)

Easy installation, without any special tools
Transparent plastic, easy to oberve the situation
High temperature resistance -40-65℃
Avoid fluid (gas) entering the microducts and damage the equipments



Divisible water block connector (positive)

Easy installation, without any special tools
Gas and watertight up to 0.5bar
Suitable for retrofitting
Other versions available upon request





Divisible water block connector

Easy installation, without any special tools
Gas and watertight up to 0.25bar
Suitable for retrofitting
Other versions available upon request




Direct bury straight connector

Designed to connect thick-walled micducts in a direct buried environment
Permanent connection that can not be unlocked after installation
Easy to use, robust and high mechanical resistance
High temperature resistance
High pressure resistance
Standard EN50411-2-8



Direct bury end stop connector

DB end connector is used to seal a open thick -walled microduct and prevent dirt or water ingress.
They can be used for direct buried application.



Online consulting
Hotline
13901629266
QQ Service
我们竭诚为您服务!